Installing the machine
1-3
1
Before Use
Moving this machine
Move this machine as follows when this machine is required to move on the step-free same floor.
• Before moving this machine, install the handles for transporting. (two places)
Insert the handles into this machine, and fix them tightening screws.
• For safety, be sure to work it with more than 4 people.
• Do not push the cover to move this machine since the cover may be deformed. Be sure to hold the handles for
transporting when moving the machine.
• When moving this machine, take care not to give a significant impact on
it.
• If you tilt this machine, movable part(Y bar) may move. Move this after
pulling the Y bar to either front or back side or avoiding tilt
• When moving this machine, keep it as flatly as possible. Do not move it
on its side. It may cause machine failure.
To Next Page
Loading...
Need help?
General