MIMAKI UJF-3042HG - Page 21

This chapter describes the parts name and setting procedures
before use.
Installing the machine ......................................................... 1-2
Where to install the machine .......................................................1-2
Moving this machine ...................................................................1-3
Configuration and Function................................................ 1-4
Front ...........................................................................................1-4
Rear ............................................................................................1-4
Operation Panel ..........................................................................1-5
Carriage ......................................................................................1-6
EMERGENCY SWITCH ..............................................................1-6
About vacuum table............................................................. 1-7
About tap position .......................................................................1-8
Notes on vacuum table ...............................................................1-9
Connecting the cables....................................................... 1-10
Connecting the USB2.0 interface cable ....................................1-10
Connecting the power cable .....................................................1-10
Setting of ink cartridge...................................................... 1-11
Kinds of ink that can be used ....................................................1-11
About Media ....................................................................... 1-13
The sizes of media that can be used ........................................1-13
Precautions in handling the media ............................................1-13
Menu mode ......................................................................... 1-14
CHAPTER 1
Before Use