MIMAKI UJF-3042HG - Chapter 4 Maintenance

Items required for using this machine conveniently, such as an
ink replacing method or a cleaning manner, are described.
Routine maintenance ........................... 4-2
When this machine is left unused for a long
time ...........................................................4-2
Precautions in cleaning ............................4-2
Cleaning exterior surfaces ........................4-3
Cleaning the table ....................................4-3
Ink cartridge.......................................... 4-4
Replacing with a new ink cartridge ...........4-4
Setting the ink set .....................................4-5
Ink cartridge trouble ..................................4-8
600ml Ink cartridge............................... 4-9
Registering the case weight .....................4-9
Registering the cartridge weight ............. 4-10
Registering the cartridge weight
(After LVL LOW / LVL END) ...................4-11
Avoiding dripping of ink droplet
at printing............................................ 4-12
When the waste ink is full.................. 4-14
Disposing of the ink in the
waste ink tank .........................................4-14
Disposing of the waste ink in the
wiper bottle .............................................4-16
Replacing the Filter ............................ 4-18
Washing the Nozzle............................ 4-20
Wash the ink discharge passage ...... 4-22
When the Machine Is Not Used for a Long
Time (CUSTODY WASH) .................... 4-24
Washing the Head .............................. 4-26
Perform ink filling ............................... 4-28
Setting nozzle face cleaning time ..... 4-29
Maintenance for white ink.................. 4-30
Cleaning of wiper................................ 4-32
Refilling antifreeze mixed water........ 4-34
Refilling antifreeze mixed water ..............4-35
CHAPTER 4
Maintenance