Avoiding dripping of ink droplet at printing
4-13
4
Maintenance
7
Dip the cleaning swab into the cleaning solution,
and clean the side surface of the head.
• Do not wipe the nozzle face of the head. It may cause nozzle
clogging.
• To buy special cleaning swabs, contact a distributor in your
district or our office.
8
Dip the TechnoWipe (attached) into alcohol, and
clean the LED-UV irratiation outlet.
9
After cleaning, close the table front cover, and press
the key.
• Initializing starts.
• Be careful not to put the cleaning solution on the light pointer.
To Next Page
Loading...
Need help?
General