Mindray DC-T6 - TDI Image Parameters

Image Optimization 5-35
As in TDI mode, [TDI] item in the soft menu is the pathway for entering and exiting TDI
mode, you can preset its performance through the path "[Setup] → [Image Preset] →
[Menu Preset]".
5.9.2 TDI Image Parameters
 In TDI mode scanning, the image parameter area in the upper left corner of the
screen will display the real-time parameter values as follows:
z TVI
Display F 3.3 G 38 IP1 PRF 0.4k WF 3
Parameter Frequency Gain TVI IP PRF WF (Wall Filter)
z TEI
Display F 3.3 G 38 IP1 PRF 0.4K WF 3
Parameter Frequency Gain TEI IP PRF WF (Wall Filter)
z TVD
Display F 3.2 G 30 PRF 5.3k WF 296 SVD 30.0 SV 0.5
Parameter Frequency Gain PRF WF (Wall Filter) SV Position SV Size
z TVM
Image parameters combine the parameters of TVI mode and M mode.