4-10 Exam Preparation
4. Select the reason and click [OK].
5. After the above operations being taken, the exam is cancelled, and images,
measurements and report are saved with the status of the exam to be "Canceled".
îš„ If the system has been configured with a MPPS server, it will send the status
information "Cancelled" to the server. For details, please refer to relevant description
in the DICOM chapter.
4.8 Anonymous Patient Exam
The system can also carry out image scanning and measurement even though no patient
information is available：
 Deselect "Save image without patient info" in "[Setup] → [System Preset] →
[General]".
When saving an image, the system pops up the Patient Info screen to ask for the
patient information.
z Enter the information and click [OK] to save the image and data.
z Select [Cancel] and the system will not save the images.
îš„ If "Save image without patient info" is selected
The system will automatically generate an ID, and save the images in the ID.
To Next Page
Loading...
Need help?
General
