Patient Data Management 11-15
To erase data from a CD/DVD
(1) Put the CD/DVD in the tray.
(2) Click the
symbol to pop up the Disc Option dialogue box, as shown in the
figure below.
(3) Click [Erase] to erase data from a CD/DVD.
(4) After the erasing process is completed, click [Eject] in the Disc Option dialogue
box.
Tips:
z Writing data using “Send To” supports PC format transfer function, while CD/DVD
written by “Backup” supports only system-relevant formats.
z The symbol indicates that the input CD/DVD is damaged or with data of
wrong format.
CAUTION:
1. During the backup process, if a CD/DVD is forcibly taken
out or you perform other operations, the backup process
will fail or the system may malfunction.
2. Use the [Eject] selection to remove the disk, or , damage
or data loss will be resulted.
11.8 Patient Task Management
Click at the lower right corner of the screen to pop up the following dialogue box:
To Next Page
Loading...
Need help?
General
