Setup 15-13
îš„ Imaging mode relevant parameters.
îš„ Parameters pertinent to both exam mode and probe.
îš„ Other image specific parameters.
For details, please refer to the relevant imaging modes chapters.
15.4 Measure Preset
For measurements details, please refer to the [Advanced Volume].
15.5 Body Mark Preset
In order to accommodate your workflow – numerous preferential settings can be captured
in Body Mark Preset. This function is to preset, body marks in each exam type, or
user-defined body marks.
15.5.1 Preset Body Mark for Exam Mode
1. To enter Body Mark Preset screen:
z In the Setup menu, select [Body Mark Preset] item to enter the Body Mark Preset
screen. Or,
z Click [Body Mark Preset] button in the Exam Config page ([Setup] → [Exam
Preset] → Exam Config) to open the Body Mark Preset screen.
2. Select the body mark applied exam mode: select the exam mode in the drop-down list,
the current exam mode is by default.
3. Set library: enter the library name of custom body marks.
4. Add or delete body mark(s)