3-14 System Preparation
Please refer to the accompanying manuals of the printers for more details.
3.7.4 Video Printer
The video printers supported by the system include analog video printers and digital video
printers. The video printers, whether analog or digital, consist of B / W printers and color
printers.
CAUTION:
The auxiliary power outlet in the system is used to supply
power for approved peripheral devices. Do not connect
other/unapproved devices to this outlet; otherwise the rated
output power may be exceeded and the system failure may
result. Maximum output power of the outlet is 240VA.
3.7.4.1 Installing the B/W Video Printer
1. Unpack the printer.
2. Take off the window cover of the video printer room below control panel of the system.
3. Connect the power cable, remote cable and video cable in the video printer room to
the analog B/W video printer.
If it is a digital B/W video printer, connect the power cable and USB cable in the video
printer room to it.
There are four cables provided in the printer room:
(1) Power cable;
(2) Remote cable;
(3) Video cable;
(4) USB cable (the USB port is applied for connecting digital video printer).
To Next Page
Loading...
Need help?
General
