System Preparation 3-13
4. Select "Add Local Printer" and click [Next] to enter the screen of browsing driver;
select the desired driver and click [OK] to install the driver.
z Printers listed in "2.5 System Configuration" have drivers installed already.
z Click [Printer Attribute] to see the printer attribute.
5. Click [OK] to finish the installation.
îš„ Add Network Printer
After the system is connected into a LAN, enter the "[Setup] → [Peripheral Preset] →
[Printer] → [Printer Driver]" screen.
1. Click [Add Printer] and select the types of adding network printer
z Search Network Printer
Select "Search Network Printer" and click [Next] to search for the printer; select
the domain and server in the screen to find the printer.
z Connecting to the specified printer
Select "Connect to this Printer" and enter the printer address in the field box.
2. When the network printer is successfully connected, you can see the printer in the list.
Tips: the network printer functions depending on the configured network environment in
the hospital, please consult the network configuration manager in case of failure.
NOTE: When you install the printer’s driver, you must specify the specific path for
installation; otherwise, vague path may result in longer time for searching.
îš„ Report print
You can use a graph/ text printer to print report or images.
z To set the default report printer and properties:
In "[Setup] → [Print Service]" screen, select the "Report Print" column in the
service list, set the items in the "Property" box.
z To print a report:
Click [Print] in the report dialog box to print a report; or, use the user-defined key
to print, see "15.1.7 Key Config" for details.
To Next Page
Loading...
Need help?
General
