V
2. When you find that the contents of the manuals in CD are NOT consistent
with the system or English manuals, please ONLY refer to the corresponding
English manuals.
3. The accompanying manuals may vary depending upon the specific system
you purchased. Please refer to the packing list.
Software Interfaces in this Manual
Depending on the software version, preset settings and optional configuration, the actual
interfaces may be different from those in this manual.
Conventions
In this manual, these conventions are used to describe the buttons on the control panel,
the items in menu, buttons in dialog box and some basic operations:
z <Buttons>: The angular bracket indicates buttons, knobs and other controls on
control panel.
z [Items in menu and buttons in dialog box]: The square bracket indicates items in
menu or the soft menu, or buttons in dialog box.
z Click [Items or Button]: Move the cursor to the item or button and press <Set>, or
click it on the soft menu.
z [Items in Menu]Æ[Items in Submenu]: Selects a submenu item following the path.
z [Dyn Rng (Value)]: Indicates menu items with parameter, (value) shows the
current value of the item.
To Next Page
Loading...
Need help?
General
