Mindray DC-T6 User Manual

DICOM 12-5
Tips:
z If the currently entered name has already existed, the system will pop up: “The
server name exists!” Click [OK] to enter another name.
12.1.4 DICOM Service Setting
When the system is configured with DICOM basic function module, and installed DICOM
Worklist, MPPS, DICOM Structured Reporting, DICOM storage commitment, and Query/
Retrieve modules, the corresponding preset settings can be found in DICOM Service
screen.
Open “[Setup]→[Network Preset]→[DICOM Service]” to set properties of DICOM
services.
12.1.4.1 Storage Setting
1. Enter the “Storage” page: “[Setup]→[Network Preset]→[DICOM Service]→Storage.
z Select device, enter the information. For device setting, please refer to “12.1.3
DICOM Server Setting”.
z Click [Add] to add the service to the Service list.
z Select an item in the service list, change the parameters in the above area, and
click [Update] to update the item in the service list.
z Select an item in the service list, and click [Delete] to delete the service.
z Select an item in the service list, and click [Default] to set the server to be the
default service.
2. Select an item in the service list, and click [Verify] to verify the connection.
3. Click [Exit] to confirm the setting and exit the page.
DICOM storage setting items are described as follows:

Mindray DC-T6 Specifications

General

Brand	Mindray
Model	DC-T6
Category	Medical Equipment
Language	English