Setup 15-1
15 Setup
The Setup function is designed to set the configuration parameters of operating the
system and maintain user workflow preferences. The setup data of the user and system
are stored to the hard drive, and should be backed up to CD/DVD or USB memory
devices.
CAUTION:
When the setup data is changed, be sure to save the
preferences according to the methods described in this
chapter. Mindray is not responsible for the loss of the setup
data.
To enter Setup:
z Press the <Setup> to enter Setup; or
z On image menu, select [Setup] in the [Other] menu to enter the Setup.
z On “Probe & Exam” selection page, click [Exam Preset] to enter Exam Preset
page.
To exit Setup:
Select [Return] on the Setup menu or press <ESC> to close the Setup menu with
parameter settings saved.
If you change the system language and click [Return] on the Setup menu or press
<ESC>, the system will automatically restart to make the changing effective.
Basic operations
The commonly-used setting types are:
z Text box: posit the cursor into the corresponding box; enter the desired value
through keyboard.
z Radio button: click the button to select an item.
z Check box: click the check box to select one or several options.
z Drop-down list: click the arrow beside the list to select an item.
General buttons
z [OK]: click to confirm the setting, exit the current page and then return to the
previous page.
To Next Page
Loading...
Need help?
General
