2-10 System Overview
No. Name Function
1. Monitor Displays the images and parameters during scanning.
2. Control Panel Operator-system interface or control.
3. DVD drive DVD drive.
4. Power button
Used for turning on/off the power supply (on the upper
left corner of control panel).
5. Video printer room Used for placing black/white video printer.
6. Probe ports
Sockets connecting probes and the main unit.
The leftmost one is for 4D probes.
7. Caster Used for securing or moving the system.
8.
Probe and ultrasound gel
holder
Used for temporarily placing probes or ultrasound gel.
9. Handle Used for pushing and moving the system.
10.
Physiological-signal
panel
Used for connecting the ECG leads, footswitch, and
inputting ECG signal.
11. Monitor support arm
Used for support and adjustment of height and position
of LCD monitor.
12.
Table for placing color
printer
Used for placing the color video printer.
13. I/O Panel
Interface panel used for inputting and outputting
signals
14. Power supply panel Electrical port panel.
2.7 I/O panel
To Next Page
Loading...
