13-10 Probes and Biopsy
7L5 102.4 69.7 25.9 2260±50mm
2P2 102.7 38.1 30.4 2260±50mm
V10-4 315.84 40.95 31.85 2260±50mm
V10-4B 323 32.25 31.01 2260±50mm
6C2 95 33.5 24.8 2260±50mm
L11-4 101.6 61 25.7 2260±50mm
L12-4 101.6 61 25.7 2260±50mm
L7-3 101.6 61 25.7 2260±50mm
L14-6 91.4 47.1 22.8 2260±50mm
4CD4 122.74 73 51.6 2260±50mm
P4-2 102.7 38.1 30.4 2260±50mm
7L4A 101.6 61 25.7 2260±50mm
7LT4 50 41 20.5 1530mm±50mm
L14-6N 102 61 26 2010mm±20mm
CB10-4 325 39 34.5 1970mm±20mm
P7-3 79 34 25.5 2260mm±50mm
CW5s 123 11 11 2050mm±50mm
CW2s 120 80 18 2100mm±50mm
The above is a dimension illustration of the 6C2 probe.
You can select the probe sheath according to the actual application situation.
13.1.5 Probes Cleaning and Disinfection
After completing each examination, clean and disinfect (or sterilize) the probes as
required. When biopsy procedures have been performed, be sure to sterilize the
needle-guided bracket. Fail to do so may result in the probe and the needle-guided
bracket to becoming sources of infection. Please follow the instructions in the manual for
cleaning.
To Next Page
Loading...
Need help?
General
