Setup 15-9
Type Function Description
Home
To make the cursor return to the home
position
ABC Display To display/hide the comments
Erase All Text To clear all text on the screen
iZoom To enter/ exit full-screen zoom status
iVision iVision
Cine To enter cine status
Exit To exit from the current screen
Other Settings
Item Description
Key Lightness To set the lightness for the keys: 0, 1, 2, 3
Key Volume To set the key volume: 0-3, 0 means no sound
Trackball Speed
To set the trackball speed when move the trackball: Slow,
Medium, Fast
Trackball Lightness
To set the color for the trackball: White, Blue, Green, Pink,
Purple, Yellow
15.1.8 Biopsy
Open the Biopsy page via “[Setup] → [System Preset] → [Biopsy]”, as shown in the figure
below.
Bracket model
To select the default needle-guided bracket for the probe.
(1) Select the probe model in the left-hand list, the matched bracket model will be
shown in the right-hand area.
(2) Select the bracket model in the right-hand list.
(3) Click [OK] to confirm the setting.
Parameter setting
Guide Line Display: to set if to display the biopsy.
Guide Line Dot Type: Small, Medium, Big.
15.1.9 Option
Open the Option page via “[Setup] → [System Preset] → [Option]”.
In Option list, the system lists out all the system supported options and the installation
status (Disabled or Installed).
z Click [Install] to begin the installation of a disabled option.
z Click [Uninstall] to begin the un-installation of an already installed option.
z For some of the options, it can be provided for use for a certain period before you
buy it, click [Trial] to do this.
To Next Page
Loading...
Need help?
General
