Image Optimization 5-71
5.12.6 Save Image
Panoramic image viewing mode:
z Press <Save> key (with user-defined saving function) to save the extended
image to the default position in the format of FRM.
z Click [Save Cine] item in the soft menu to save the extended image and its series
of images acquired in the format of CIN.
Cine reviewing mode:
z Press <Save> key (with user-defined saving function) to save the single-frame
image to the default position, in the format of FRM.
z Click [Save Cine] to save the extended image and its series of images acquired in
the format of CIN.
5.13 Image Preset
In the Image Preset interface, you can preset image parameters of exam modes and soft
menu and menu layout of imaging modes.
5.13.1 Image Preset
The image preset is used to set image parameters for all the probes and a specific probe
in a specific exam mode. The setting methods are similar although parameter items are
different in each image mode.
An example is provided below to demonstrate the steps of preset as in Adult ABD exam,
B/THI mode for the 4CD4 probe, for special imaging modes (Free Xros M, 3D/4D, iScape),
please refer to the relevant sections of each mode:
1. Press <Setup> on the keyboard to enter the Setup menu.
2. Select “[Image Preset] → [B/THI]” to enter the B mode parameters preset, as shown
in the following figure.
To Next Page
Loading...
Need help?
General
