Stress Echo 6-11
Item Function Description
Acquire mode Set the type of ROI: manual ROI or full-screen.
Image compression Set image compression level.
Overlay Select the items to be labeled on each loop.
WMS type Set the methods of chamber segments division.
Printer Set the printer used for report printing.
QT-Time Table
To customize the length of systolic duration acquired for a specific
heart rate. You can add and remove entries in this table. You can
also load the factory defaults.
Heart rate Enter the heart rate.
Syst. duration Enter the systolic duration.
Beep during
acquisition
Set if to beep during the acquisition.
Reset table To reset the QT time table.
QT-Time Table Operation:
To add an entry:
Enter a heart rate and the referring systolic duration and then click [Update].
To delete an entry:
Select the required heart rate and systolic duration pair from the QT – Time Table and
then click [Delete].
To load the factory defaults:
Select the [Factory Settings] button.
To Next Page
Loading...
