15-20 Setup
For the printers aforementioned in “2.5 System Configuration”, you do not need to install
them. For printers that need to install the driver, please refer to “3.7.3 Graph /Text printer
3.7.4 Video Printer” for details.
NOTE: If you use the user-defined key to print, the user-defined printer type shall be
consistent with that of the default printer.
z Print Service Setting
h Add Service: click to begin print service adding.
h Remove Service: click to delete the selected print service.
h Rename Service: click to rename the selected print service.
h Default print service: click to set the selected print service as the default one.
h Property: to preset the property of print services.
Tips: please set the proper page margin, otherwise, only part of the contents can be
printed.
z Printer Driver Setting
Printers listed in the operator’s manual are all supported by the system, no drive
is required.
Click [Print Driver] page to enter printer driver setting screen:
h View the printer name as well as print status.
h You can add printer including network printer.
h Check the printer attribute. The attributes vary with the print services.
Input& Display
In this page, you can set output setting and display parameters.
To Next Page
Loading...
Need help?
General
