Mitsubishi Electric MELSEC iQ-F Series - Page 160

158
9 PROGRAMMING
9.2 Communication Example Between the Master Station and Local Station
3. Set the FX5-CCLGN-MS as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
4. Click the [OK] button to add a module label of the FX5-CCLGN-MS.
5. Set the items in "Required Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [FX5-CCLGN-MS]  [Required Settings]