Mitsubishi Electric MELSEC iQ-F Series - Page 70

68
5 SYSTEM CONFIGURATION
5.1 Structure of CC-Link IE TSN Class B Devices and Ethernet Devices
When the communication speed for the master station is set to 100Mbps
This mode indicates the availability of connection with a network configuration device when "Communication Speed" of the
master station set to "100Mbps".
: Connection available, : Connection available via an industrial switch, : Connection not available
S: Industrial switches (for CC-Link IE TSN Class B) can be used.
H: Industrial switches (for CC-Link IE TSN Class A) can be used.
*1 For a device station with a communication speed of 100Mbps, set "Communication Period Setting" to "Basic Period" or "Normal-Speed".
Precautions
When an industrial switch (for CC-Link IE TSN Class B) is used, check the industrial switch (for CC-Link IE TSN Class B)
specifications on the CC-Link Partner Association website (www.cc-link.org).
Device on the master station
side
(A device near the master
station)
Device on the end side (A device far from the master station)
Local station (CC-Link IE TSN
Class B device)
Remote station (CC-Link IE
TSN Class B device)
Ethernet device
1Gbps 100Mbps 1Gbps 100Mbps 1Gbps 100Mbps
Master station
(CC-Link IE TSN
Class B device)
100Mbps S
*1
S
*1
SH
Local station
(CC-Link IE TSN
Class B device)
1Gbps 
100Mbps S
*1
S
*1
SH
Remote station
(CC-Link IE TSN
Class B device)
1Gbps 
100Mbps S
*1
S
*1
SH