Mitsubishi Electric MELSEC-Q/L - Page 1015

APPENDICES
Appendix 1 Operation Processing Time
1013
A
Application
instruction
ORTM>= When not executed 0.018 0.018 0.018
Comparison of
specified clock
In conductive
status
2.600 14.800 2.600 14.800 2.600 14.800
In non-
conductive status
2.500 14.500 2.500 14.500 2.500 14.500
Comparison of current
clock
In conductive
status
4.800 22.600 4.800 22.600 4.800 22.600
In non-
conductive status
4.700 22.100 4.700 22.100 4.700 22.100
LDDT= Comparison of
specified date
In conductive
status
2.700 14.900 2.700 14.900 2.700 14.900
In non-
conductive status
2.600 14.500 2.600 14.500 2.600 14.500
Comparison of current
date
In conductive
status
4.800 22.600 4.800 22.600 4.800 22.600
In non-
conductive status
4.800 22.200 4.800 22.200 4.800 22.200
ANDDT= When not executed 0.018 0.018 0.018
Comparison of
specified date
In conductive
status
2.500 14.700 2.500 14.700 2.500 14.700
In non-
conductive status
2.500 15.200 2.500 15.200 2.500 15.200
Comparison of current
date
In conductive
status
4.600 22.400 4.600 22.400 4.600 22.400
In non-
conductive status
4.700 22.600 4.700 22.600 4.700 22.600
ORDT= When not executed 0.018 0.018 0.018
Comparison of
specified date
In conductive
status
2.600 15.700 2.600 15.700 2.600 15.700
In non-
conductive status
2.600 15.000 2.600 15.000 2.600 15.000
Comparison of current
date
In conductive
status
4.700 23.300 4.700 23.300 4.700 23.300
In non-
conductive status
4.700 22.500 4.700 22.500 4.700 22.500
LDDT<> Comparison of
specified date
In conductive
status
2.700 14.700 2.700 14.700 2.700 14.700
In non-
conductive status
2.700 14.900 2.700 14.900 2.700 14.900
Comparison of current
date
In conductive
status
4.800 22.600 4.800 22.600 4.800 22.600
In non-
conductive status
4.800 22.800 4.800 22.800 4.800 22.800
Category Instruction Condition (device) Processing time (s)
Q03UDVCPU Q04UDVCPU Q06UDVCPU,
Q13UDVCPU,
Q26UDVCPU
Min. Max. Min. Max. Min. Max.