Mitsubishi Electric MELSEC-Q/L - Page 1033

APPENDICES
Appendix 1 Operation Processing Time
1031
A
*1 For the L06CPU and L06CPU-P, the minimum value is 3.900s and the maximum value is 4.900s.
For the instructions for which a rising edge instruction (P) is not described, the processing time is the same
as an ON execution instruction.
(Example) MOVP instruction, WANDP instruction etc.
Application
instruction
DROL (D) n n=1 2.350 10.800 2.200 4.900 1.800 3.300
n=31 2.350 10.800 2.200 4.900 1.800 3.300
DRCL (D) n n=1 2.350 13.300 2.200 5.900 1.900 3.800
n=31 2.350 13.300 2.200 5.900 1.900 3.800
SFR (D) n n=1 2.350 9.900 2.200 4.600 1.700 2.600
n=15 2.350 9.900 2.200 4.600 1.700 2.600
SFL (D) n n=1 2.350 9.850 2.200 4.600 1.800 2.700
n=15 2.350 9.850 2.200 4.600 1.800 2.700
DSFR (D) n n=1 3.250 15.500 2.200 6.100 2.200 4.300
n=96 32.600 45.000 33.400 38.100 23.900 26.100
DSFL (D) n n=1 3.200 15.500 2.200 6.100 2.100 4.000
n=96 32.600 45.100 33.500 38.000 23.700 25.800
SUM (S)=0 3.100 8.950 3.000 4.800 2.900 3.600
(S)=FFFFH 3.000 8.850 3.000 4.900 2.900 3.600
SEG When executed 2.100 7.700 1.700 3.600 1.500 2.100
FOR  1.500 7.500 1.300 3.200 0.870 2.100
CALL Pn Internal file pointer 4.800 5.400 2.600 4.000 2.300 3.600
Common pointer 7.100 30.500 4.600 13.500 3.200 4.900
CALL Pn (S1)
to (S5)
 50.200 62.000 31.200 36.000 26.100 29.300
Category Instruction Condition (device) Processing time (s)
L02SCPU, L02SCPU-P L02CPU, L02CPU-P L06CPU, L06CPU-P,
L26CPU, L26CPU-P,
L26CPU-BT, L26CPU-
PBT
Min. Max. Min. Max. Min. Max.