Mitsubishi Electric MELSEC-Q/L - Page 1034

1032
APPENDICES
Appendix 1 Operation Processing Time
■Table of the time to be added when file register, extended data register, and extended link
register are used
• When using L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P, L26CPU, L26CPU-P, L26CPU-BT, and
L26CPU-PBT
■Table of the time to be added when F/T(ST)/C device is used in OUT/SET/RST instruction
• When using L02SCPU, L02SCPU-P, L02CPU, L02CPU-P, L06CPU, L06CPU-P, L26CPU, L26CPU-P, L26CPU-BT, and
L26CPU-PBT
Device name Data Device specification
location
Addition time (s)
L02SCPU,
L02SCPU-P
L02CPU,
L02CPU-P
L06CPU,
L06CPU-P,
L26CPU,
L26CPU-P,
L26CPU-BT,
L26CPU-PBT
File register (R) When standard RAM is
used
Bit Source 0.100 0.100 0.048
Destination 0.220 0.220 0.038
Word Source 0.100 0.100 0.048
Destination 0.100 0.100 0.038
Double word Source 0.200 0.200 0.095
Destination 0.200 0.200 0.086
File register (ZR),
extended data register
(D), extended link
register (W)
When standard RAM is
used
Bit Source 0.160 0.140 0.057
Destination 0.320 0.280 0.048
Word Source 0.160 0.140 0.057
Destination 0.160 0.140 0.048
Double word Source 0.260 0.240 0.105
Destination 0.260 0.240 0.095
Instruction name Device name Condition Addition time (s)
L02SCPU,
L02SCPU-P
L02CPU,
L02CPU-P
L06CPU,
L06CPU-P,
L26CPU,
L26CPU-P,
L26CPU-BT,
L26CPU-PBT
OUT F When not executed 2.900 2.000 1.570
When executed 116.000 53.100 38.090
T(ST), C When not executed 0.180 0.120 0.030
When
executed
After time up 0.180 0.120 0.030
When added 0.180 0.120 0.030
SET F When not executed 0.060 0.040 0.010
When executed 116.000 52.000 40.600
RST F When not executed 0.060 0.040 0.010
When executed 55.800 45.700 36.600
T(ST), C When not executed 0.180 0.120 0.030
When executed 0.180 0.120 0.030