454
7 APPLICATION INSTRUCTIONS
7.5 Data Processing Instructions
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
• The sample program calculates the added data and horizontal parity of six points of data starting from D0 and stores the
results in the devices specified by D100 and D101.
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4101 The value in the device specified by the instruction exceeds the setting
range.
[Ladder Mode]
To Next Page
Loading...
