7 APPLICATION INSTRUCTIONS
7.19 Other Instructions
787
7
• When X10 is turned ON, the following program adds four bytes of binary data (00H, 01H, 02H, and 03H) to file "ABCD.BIN"
in the memory card inserted to drive 2.
• Assume that 8 points from (D0) are reserved for the control data devices.
[Ladder Mode]
[List Mode]
Sets the number of request write data
Normal completion display
Sets the execution/completion type
Sets the designation of the number of columns
Sets the file name
Error completion display
Sets the data to be written.
To Next Page
Loading...
