Mitsubishi F700 Series User Manual

VII
CONTENTS
7.3.1 Inverter outline dimension drawings ...................................................................................... 369
7.4 Heatsink protrusion attachment procedure .................................................. 378
7.4.1 When using a heatsink protrusion attachment (FR-A7CN) ................................................... 378
7.4.2 Protrusion of heatsink of the FR-F740-04320 or more .......................................................... 378
APPENDICES 381
Appendix 1 For customers who are replacing the conventional model
with this inverter ................................................................................ 382
Appendix 1-1 Replacement of the FR-F500 series ......................................................................... 382
Appendix 1-2 Replacement of the FR-A100 <EXCELENT> series ................................................. 383
Appendix 2 Parameter clear, parameter copy and instruction code list........... 384
Appendix 3 Specification change ......................................................................... 394
Appendix 3-1 SERIAL number check .............................................................................................. 394

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)