Mitsubishi F700 Series User Manual

303
Useful functions
4
PARAMETERS
4.22.5 Free parameter (Pr. 888, Pr. 889)
Parameters you can use for your own purposes.
You can input any number within the setting range 0 to 9999.
For example, the number can be used:
 As a unit number when multiple units are used.
 As a pattern number for each operation application when multiple units are used.
 As the year and month of introduction or inspection.
Parameter
Number
Name Initial Value Setting Range Description
888 Free parameter 1 9999 0 to 9999 Desired values can be input. Data is
held even if the inverter power is
turned OFF.
889 Free parameter 2 9999 0 to 9999
The above parameters can be set when Pr. 160 User group read selection = "0". (Refer to page 185)
The above parameters allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write
selection.
REMARKS
Pr. 888 and Pr. 889 do not influence the inverter operation.

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)