Mitsubishi F700 Series User Manual

285
PID control
4
PARAMETERS
· When using two motors in the direct system (Pr. 597 = "2")
CAUTION
· When a start signal is turned OFF while running, MC (RO1 to RO4) turns OFF and the inverter decelerates.
· When an error occurs while running, MC (RO1 to RO4) turns OFF and the inverter output is shut off.
RIO1
RIO2
RO1
RO2
M1
M2
Pr. 590
Pr. 580
Pr. 581
Pr. 590
Pr. 591Pr. 581
Pr. 580
Pr. 584
Pr. 125
C2 (902)
Pr. 587
Pr. 125
Pr. 584
Commercial power
supply operation
Commercial power
supply operation
Inverter
operation
Inverter
operation
Inverter
operation
Inverter operation
50Hz

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)