Mitsubishi F700 Series User Manual

310
Useful functions
 Acceleration/deceleration time increment (Pr. 999  ="30(0.1s) or 31(0.01s)")
* The set value is changed for Pr. 21.
Parameter Name
Initial set
increment
Pr.999 = "30" Pr.999 = "31"
Refer to
page
7 Acceleration time 0.1s 0.1s 0.01s 94
8 Deceleration time 0.1s 0.1s 0.01s 94
16
Jog acceleration/deceleration
time
0.1s 0.1s 0.01s 88
21
Acceleration/deceleration time
increments
10
* 1 * 94
44
Second acceleration/
deceleration time
0.1s 0.1s 0.01s 94
45 Second deceleration time 0.1s 0.1s 0.01s 94
264
Power-failure deceleration time
1
0.1s 0.1s 0.01s 151
265
Power-failure deceleration time
2
0.1s 0.1s 0.01s 151
582
Auxiliary motor connection-time
deceleration time
0.1s 0.1s 0.01s 277
583
Auxiliary motor disconnection-
time acceleration time
0.1s 0.1s 0.01s 277
REMARKS

When a parameter is set as the acceleration/deceleration time (0.1s), the 0.01s increment is dropped.
 When a parameter is set as the acceleration/deceleration time (0.01s), the parameters are limited at the maximum value of the
parameter setting range. For example, Pr. 7 = "361.0s" when 0.1s increment is selected, and Pr. 7 = "360.00s" when 0.01s
increment is selected.

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)