Mitsubishi F700 Series User Manual

377
Outline dimension drawings
7
SPECIFICATIONS
 Operation panel (FR-DU07)
 Parameter unit (option) (FR-PU07)
2-M3 screw
Panel
Cable
Air-
bleeding
hole
FR-DU07
Operation panel connection connecto
r
(FR-ADP option)
<Outline drawing> <Panel cutting dimension drawing>
78
50 44
723 3
81
33
16
25
3.2max
72
44
21
20
22
27.8
6
80.3
(14.2)
2.5
50
(11.45)
25.05
135
83
*1
*1
*1
*1
67
51
40
56.8
57.8
26.5
4-R1
4-φ4 hole
(
Effective depth of the mounting
screws hole 5.0)
M3 screw *2
26.5
40
Air-bleeding
hole
<Outline drawing> <Panel cutting dimension drawing>
(Unit: mm)
*1 When installing the FR-PU07 on the enclosure, etc., remove screws
for fixing the FR-PU07 to the inverter or fix the screws to the FR-
PU07 with M3 nuts.
*2 Select the installation screws whose length will not exceed the
effective depth of the installation screw hole.

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)