V5A51 -
Transmission
23E-5-34
60. Connect the connector to the valve body.
61. Install the detent spring.
62. Tighten the detent spring mounting bolt to the specified
torque.
63. Install the oil filter and a new O-ring.
64. Apply sealant on the oil pan.
Specified sealant:
MITSUBISHI genuine sealant part No. MR166584
or equivalent
Caution
D
Evenly squeeze out the sealant so that it is not
insufficient or excessive.
65. Install the oil pan.
66. Tighten the oil pan mounting bolts to the specified torque.
AddedPWEE8920-I
E
Mar. 2000Mitsubishi Motors Corporation
Oil filter
O-ring
3 mm diameter
To Next Page
Loading...
Need help?
General
