Operating the unit
65Operating instructions
Requirement Lid fully open
Filled with deep-frying oil
Level of deep-frying oil is between the "OIL" fill level marks
Manual cooking
menu displayed
1. Tap deep-frying mode.
The
Cooking mode
window is displayed.
The cooking time and cooking temperature are applied for all
timers. The cooking time can then be adjusted individually.
2. Configure the settings.
The
Cooking mode
window shows the configured settings.
3. Tap the "Start" button in the information bar.
The pan heats up.
The "Start" button is replaced with the "Stop" button.
4. Tap the "Continue" field.
The
Timer
windows are displayed.
5. Adjust the timers if necessary by tapping the relevant
Timer
field.
6. Wait for the zone to reach the cooking temperature.
A signal sounds.
The
Operating temperature
display for the zone turns orange.
7. Place the deep-frying basket containing the food to be cooked into
the zone.
8. Tap the
Start/Stop
field for the timers.
The zone timer starts.
The
Start/Stop
field turns red and displays "Stop".
Deep frying has started.
All timers can be started independently of each other. Deep
frying can be carried out in the whole pan without starting the
timers.
In zones where deep frying has started, the actual temperature
of the deep-frying oil can be displayed by tapping the
Cooking
temperature
field.
4426201-20ABBE-A
To Next Page
Loading...
