1. General
LC100 is a microprocessor control system for elevators up to 40 stops and 8 elevators in multiplex work. The
system is universal and applicable to a wide variety of requirements that are set to control a new generation of all types
of elevators up to 4m/s..
The system is modular with the basic concept that signals are processed on the spot and the output signals are
generated where needed. Communication between modules is realized with
very robust standardized industrial CAN bus to meet the latest achievements in technology of CAN communications.
System is mainly produced in SMT technology (surface mounting technology).
The system is designed with components that meet the low power consumption. All boards have passed several
tests: electrical test of printed boards before assembling, functional test after production and temperature and load
test for each lot.
The system meets the following standards:
EN 81-1, EN 81-2, EN81-A3
EN 12015, EN 12016,
EN 55011,EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
EN 81-20, EN81-50, EN81-21
Basic features:
- The universal program for all types of installation with the possibility of complete user settings with LCD mobile
terminal, personal computer or through the internet.
- Applicability to all known types of drive elevators (adaptability to different systems of
control plants), different types and kinds of doors, a passing cab.
- A short floor distances, relabeling, door preopening, several types of parking, more fire zones, loading
and unloading of the building, driving priority.
- Different modes of call processing, with emphasis on energy saving and lighting and ventilation energy
saving management.
- Module connection with connectors – plugs & plays system.
- Universal traveling cable for all kind of installation prewired for easy connecting.
- Different types of copying the position of the cab.
- Cabinet load measurement.
- Monitoring the temperature of the engine and control cabinets.
- Landing correction for each floor.
- Parameter selection for signalization.
- More than 100 parametric timers for various applications.
- Real time failure statistics.
- Small size plate which provide a control cabinet of width 120 mm.
- Safety circuit voltage from 24 DC to 230 AC.
- Adaptability to new installations and modernization.
- Monitoring system via Internet.
Modules of LC100 system:
LC100-C Main control board
LC100-K Cabin input-output board
LC100-S Safety circuit controlling board
LC100-Z Cabin connection board with emergency power suply 12VDC
LC100-I Shaft input-output board
LC100-B CAN bridge board
LC100-M3, M4, M5, M6, M8 Landing call unit with dot matrix floor indicator
LC100-M7 Landing call unit with seven segment floor indicator
LC100-G Monitoring connection board
LC100-R, T Relay board with 4 relays (R) and 8 relays (T)
LC100-E,J Input-output board
LC100-F Aditional in-out board (16 I/O)
LC100-V Weight measurement board (available from 11/2011)
To Next Page
Loading...