MLC LC100 - Page 88

88
LC100 Instruction manual
4/6 Parameters
3/12 Main drive
Type C
C-20
Open brake time on evacuation
0-2,5s
Parameter is used for setting the „on“ time of output function FO-36.
C-21
Close brake time on evacuation
0-2,5s
Parameter is used for setting the „off“ time of output function FO-36.
C-21
Close brake time on evacuation
0-2,5s
Parameter is used for hydraulics elevators. Functions FO-001 are switched off
with delay C-22.
C-21
Close brake time on evacuation
0-2,5s
Parameter is used for hydraulics elevators. Functions FO-001 are switched off
with delay C-23.