Appendix
10/05 AWB8230-1541GB
198
Flush mounting the keypad in the mounting frame
X Remove the protection foil from the gasket on the inner frame.
X Fit keypad DEX-KEY-6… in the mounting frame.
X Remove the protection foil from the gasket on the mounting
frame.
X Press the mounting frame and the front frame (complete with
keypad) together until the side fixings engage.
X Place the supplied gasket on the front or rear of the mounting
frame, depending on your application.
Figure 168:Removing protective foil from the gasket
Figure 169:Fitting keypad DEX-KEY-6…
Figure 170:Removing protective foil from the outer gasket
Figure 171:Joining the frames
Figure 172:Self-adhesive gasket
h
Remove the second protective foil only when finally
mounting the keypad.
To Next Page
Loading...
