10/05 AWB8230-1541GB
Optional modules
199
The mounting frame can be fitted in one of two ways: Depending on the application (control panel door or waterproof
mounting), apply the supplied gasket to the mounting frame or the
front frame.
Mounting method A
Mounting in a panel door or on a control desk with standard-size
punching tool for instruments (67 mm square hole).
Figure 173:Fitting the mounting frame
A on top of the mounting surface (panel mounting)
B behind the mounting surface (waterproof mounting)
a a
b
A
b
a b
B
Figure 174:Gasket for control panel door (reverse side, A)
To Next Page
Loading...
