AT Commands Reference
94 98-08901C68-O
4.4.1.1 +CPBS, Select Phone Book Memory
This command selects the memory that is to be used for reading and writing entries in g20s that contain more than one phone
book memory (separate storage on the SIM card and in the g20’s internal EEPROM).
The available phone books in a particular g20 depend on the implementation.
Set Command
The Set command selects the phone book memory storage which is to be used by other phone book commands.
<profiling_icon> Indicates the index of the icon associated with the phone
book entry
0-14 Valid pre-defined icons
255 Invalid icon
<category> Category associated with the phone book entry.
1-30 Number of categories that can be defined.
Maximum number of categories is 30.
The default value is 1.
<first_last_enabled> This field determines whether the phone book record
contains information about the split between the first name
and the last name.
0 Second sub-field is the last (family) name.
1 Second sub-field in <text> is the first (given) name.
255 Record does not contain information about the first
name and last name fields.
<sub_field_index> A zero based index pointing to the first character in the
second subfield.
0 First sub-field does not exist.
If the <first_last_enabled> field is 255, then the value in this
field is ignored. The second sub-field is defined as all
characters following the first sub-field.
Command Response/Action
AT+CPBS=<storage> OK
or:
+CME ERROR: <err>
Table 31. AT Phone Book Commands (Continued)
<Parameter> Description
To Next Page
Loading...
