AT Commands Reference
188 98-08901C68-O
Example
ATS36?
005
OK
ATS0=3
OK
ATS0?
003
OK
4.10.1.6 \S, Show the Status of the Commands and S-registers in Effect
This command displays the status of all commands and S-registers.
4.10.1.7 ?, Return the Value of the Last Updated S-register
This command displays the most recently updated value stored in an S-register.
Example
AT?
003
OK
ATS36=5
OK
AT?
005
OK
S39 Read-only. Holds value of &Kn (in bits 0, 1 and 2). — — 3
S40 Read-only. Holds value of \An (in bits 6 and 7). — — 192
S41 Read-only. Holds value of %Cn (in bits 0 and 1). — — 3
Table 89. S-registers and the Associated S-parameters (Continued)
Sn Description
Min
Value
Max
Value
Default
Value
To Next Page
Loading...
