98-08901C68-O 201
AT Commands Reference
<report> The total number of characters and line terminators (up to
2041) in the information text.
The text must not contain the sequence 0<CR> or
OK<CR>.
Numeric format followed by verbose format:
1 "Unassigned or unallocated number"
3 "No route to destination"
6 "Channel unacceptable"
8 "Operator determined barring"
16 "Normal call clearing"
17 "User busy"
18 "No user responding"
19 "User alerting, no answer"
21 "Call rejected"
22 "Number changed"
26 "Non selected user clearing"
27 "Destination out of order"
28 "Invalid number format (incomplete number)"
29 "Facility rejected"
30 "Response to STATUS ENQUIRY"
31 "Normal, unspecified"
34 "No circuit/channel available"
38 "Network out of order"
41 "Temporary failure"
42 "Switching equipment congestion"
43 "Access information discarded"
44 "Requested circuit/channel not available"
47 "resources unavailable, unspecified"
49 "Quality of service unavailable"
50 "Requested facility not subscribed"
55 "Incoming calls barred within the CUG"
57 "Bearer capability not authorised"
58 "Bearer capability not presently available"
63 "Service or option not available, unspecified"
65 "Bearer service not implemented"
69 "Requested facility not implemented"
70 "Only restricted digital information bearer capability is
available"
79 "Service or option not implemented, unspecified"
81 "Invalid transaction identifier value"
87 "User not member of CUG"
88 "Incompatible destination"
91 "Invalid transit network selection"
95 "Semantically incorrect message"
96 "Invalid mandatory information"
97 "Message type non-existent or not implemented"
Table 96. +CEER Parameters (Continued)
<Parameter> Description
To Next Page
Loading...
