Motorola g20 - Page 92

AT Commands Reference
78 98-08901C68-O
In "g20 behavior" the following option exists:
at+cbst=?
+CBST: (000,004,006,007,014,068,070,071,075),(000-001),(000-003)
The first parameter 000 is automatic mode.
In "g18 behavior" the following exists:
at+cbst=?
+CBST: (006,007,070,071),(000),(000-001)
The g20 does not change the output (to be compatible with the g18), but for incoming calls, the phone works in automatic mode.
Read Command
Test Command
The Test command returns values supported by the MA as compound values.
Command Response/Action
AT+CBST=[<speed>[,<name>
[,<ce>]]]
OK
+CME ERROR: <err>
Command Response/Action
AT+CBST? +CBST: <speed>,<name>,<ce>
OK
Command Response/Action
AT+CBST=? +CBST: (list of supported <speed>s),(list of supported
<name>s),(list of supported <ce>s)
OK