Maintenance & Troubleshooting 8 - 9
Four Slot Spare Battery Charger
UBC Adapter
Table 8-5 Troubleshooting the Four Slot Spare Battery Charger
Problem Cause Solution
Spare Battery
Charging LED does
not light when spare
battery is inserted.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charging slot,
ensuring it is correctly seated.
Battery not charging. Charger is not receiving
power.
Ensure the power cable is connected securely to both the charger
and to AC power.
Battery is not correctly
seated.
Remove and re-insert the battery into the charger, ensuring it is
correctly seated.
Battery was removed
from charger or charger
was unplugged from AC
power too soon.
Ensure charger is receiving power. Ensure the battery is seated
correctly. If a battery is fully depleted, it can take up to five hours
to fully recharge a Standard Battery and it can take up to eight
hours to fully recharge an Extended Life Battery.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.
Table 8-6 Troubleshooting the UBC Adapter
Problem Cause Solution
Spare battery
Charging LED does
not light when spare
battery is inserted.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charging slot,
ensuring it is correctly seated.
Battery not charging. Charger is not receiving
power.
Ensure the power cable is connected securely to both the charger
and to AC power.
Spare battery is not
correctly seated.
Remove and re-insert the spare battery into the charger, ensuring
it is correctly seated.
Battery was removed
from charger or charger
was unplugged from AC
power too soon.
Ensure charger is receiving power. Ensure the battery is seated
correctly. If a battery is fully depleted, it can take up to five hours
to fully recharge a Standard Battery and it can take up to eight
hours to fully recharge an Extended Life Battery.
Battery is faulty. Verify that other batteries charge properly. If so, replace the faulty
battery.