Motorola MC31XX Series Integrator Guide

Accessories 2 - 21
2. Connect the MC31XX connector end to the MC31XX Communication/Charge cable to the mobile computer.
For more information on communications setup procedures, see Chapter 3, ActiveSync.
Universal Battery Charger (UBC) Adapter
The UBC Adapter can be used with a power supply as a standalone spare battery charger or it can be used with
the four station UBC2000 to simultaneously charge up to four spare batteries. For additional information on the
UBC 2000, refer to the UBC 2000 Quick Reference Guide, p/n 70-33188-xx.
Setup
Connect the UBC Adapter to a Motorola approved power source.
Figure 2-20 UBC Adapter Setup
Spare Battery Charging
To charge spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
2. Pivot the top of the battery down onto the contact pins.
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-1.
Power Supply
AC Line Cord
DC Cable
Power Port

Motorola MC31XX Series Specifications

General

Brand	Motorola
Model	MC31XX Series
Category	Handhelds
Language	English