Motorola MC31XX Series Integrator Guide

Accessories 2 - 19
Cables
This section describes how to setup and use the cables. The cables are available with a variety of connection
capabilities.
The following MC31XX Communication/Charge cables are available:
• Serial (RS232) Charge cable (9-pin D female with power input receptacle)
• USB Client Charge cable (standard-A connector and a barrel receptacle for power).
The following printer cables are available directly from the printer manufacturer:
• O’Neil printer cable
• Zebra printer cable.
• Monarch printer cable.
Figure 2-18 Cables (MC31XX Connector)
The MC31XX Communication/Charge cables:
• Provide the mobile computer with operating and charging power when used with the Motorola approved
power supply.
• Synchronize information between the mobile computer and a host computer. With customized or third party
software, it can also synchronize the mobile computer with corporate databases.
• Provide serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, see Chapter 3, ActiveSync.
• Provide USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, see Chapter 3, ActiveSync.
Dedicated printer cables, provide communication with a dedicated printer.

Motorola MC31XX Series Specifications

General

Brand	Motorola
Model	MC31XX Series
Category	Handhelds
Language	English