3 - 6 MC31XX Series Mobile Computer Integrator Guide
Synchronization with a Windows Mobile 6.1 Device
To synchronize with a Windows Mobile 6.1 device:
1. If the Get Connected window does not appear on the host computer, select Start > All Programs > Microsoft
ActiveSync.
Figure 3-9
Synchronization Setup Wizard Window
2. Click Next.
Figure 3-10
Synchronization Directly With a Server Window
3. Select the check box to synchronize with a server running Microsoft Exchange.
4. Click Next.
NOTE When a mobile computer with Windows Mobile 6.1 is connected to a host computer and an ActiveSync
connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft security
feature to prevent connection to two networks at the same time.