ActiveSync 3 - 5
Figure 3-7
Setup Complete Window
5. Click Finish.
Figure 3-8
ActiveSync Connected Window
During the first synchronization, information stored on the mobile computer is copied to the host computer. When
the copy is complete and all data is synchronized, the mobile computer can be disconnect from the host computer.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
NOTE The first ActiveSync operation must be performed with a local, direct connection. To retain partnerships after a
cold boot, capture partnership registry information in a .reg file and save it in the Flash File System, detailed
information is provided in the EMDK Windows CE Help File for Motorola Mobile Computers.
To Next Page
Loading...
Need help?
General