Motorola MC31XX Series Integrator Guide

Getting Started 1 - 19
Figure 1-24 Remove Button from Loop
2. Remove loop section from handle.
3. Separate the loop and hook tape and pull the handstrap through the slot in the battery door.
Figure 1-25 Remove Handstrap from Battery Door Slot
To install a new handstrap:
1. Insert one end of the loop section into the mounting slot in the handle.
2. Thread the other end of the loop section through the loop and pull to tighten the loop.
Figure 1-26 Thread Loop
3. Slip the button into the loop section.
Button
Loop

Motorola MC31XX Series Specifications

General

Brand	Motorola
Model	MC31XX Series
Category	Handhelds
Language	English