Moxa Technologies NPort W2150Plus Series User Manual

NPort W2150/2250 Plus Series User’s Manual Web Console: Serial Port Settings
7-2
 Settings for UDP Mode
¾ Destination Address 1 to 4
¾ Local Listen Port
¾ Packet Length
¾ Delimiter 1 and 2
¾ Delimiter Process
¾ Force Transmit
 Settings for Pair Connection Modes
¾ TCP Alive Check Time
¾ Destination Address
¾ TCP Port
 Settings for Ethernet Modem Mode
¾ TCP Alive Check Time
¾ TCP Port
 Settings for Terminal ASCII Mode
¾ TCP Alive Check Time
¾ Inactivity Time
¾ Auto-Link Protocol
¾ Primary and Secondary Host Address
¾ Telnet TCP Port
¾ Terminal Type
¾ Max. Sessions
¾ Change Session
¾ Quit
¾ Break
¾ Interrupt
¾ Authentication Type
¾ Auto-login Prompt
¾ Password Prompt
¾ Login User Name
¾ Login Password
 Settings for Terminal Binary Mode
¾ TCP Alive Check Time
¾ Inactivity Time
¾ Auto-Link Protocol
¾ Primary and Secondary Host Address
¾ Telnet TCP Port
¾ Terminal Type
¾ Quit
¾ Authentication Type
¾ Auto-login Prompt
¾ Password Prompt
¾ Login User Name
¾ Login Password
 Settings for Reverse Terminal Mode
¾ TCP Alive Check Time
¾ Inactivity Time
¾ TCP Port
¾ Authentication Type
¾ Map Keys <CR-LF>
 Serial Port Settings> Port 1 or 2>
C
ommunication Parameters
¾ Port Alias
¾ Baud Rate
¾ Data Bits
¾ Stop Bits
¾ Parity
¾ Flow Control
¾ FIFO
¾ Interface
 Serial Port Settings> Port 1 or 2> Data
Buffering/Log
¾ Port Buffering
Serial Data Logging
 Serial Port Settings> Welcome Message

Moxa Technologies NPort W2150Plus Series Specifications

General

Brand	Moxa Technologies
Model	NPort W2150Plus Series
Category	Server
Language	English