Use and warning instructions in compliance with EC regulations - Page 9
SECTION 2
Description Of The Instruction Manual
2. DESCRIPTION OF THE INSTRUCTION MANUAL
2.1. MANUAL IDENTIFICATION DATA
DOCUMENT TYPE
USE AND WARNING INSTRUCTIONS IN COMPLIANCE WITH EC REGULATIONS
TITLE
MULTITEL MX 250 AERIAL WORK PLATFORM
2.2. INTRODUCTION
The machine in question was designed and built in compliance with European Community directives concerning the free
circulation of industrial products in EEC countries; it is therefore delivered complete with all documentation required by said
directives.
2.3. AIM OF THE TECHNICAL DOCUMENTATION
The technical documentation consists of folders that contain a set of manuals, diagrams, drawings and annexes about the
use and maintenance of the machine in question.
MULTITEL PAGLIERO S.p.A. declines any and all responsibility for improper machine use and/or for damages caused
following the execution of operations not envisaged by the technical documentation.
2.4. RECIPIENTS
This manual is intended for:
♦ the job supervisor;
♦ the operator;
♦ qualified personnel authorized to carry out maintenance on the machine.
This manual is intended for operators assigned the task of using and managing the machine in all phases of its technical
service life. It contains topics that refer to proper machine use, for the purpose of keeping its functional and qualitative
characteristics unchanged over time. It also contains all information and warnings for using the machine under completely
safe conditions.
To Next Page
Loading...