Use and warning instructions in compliance with EC regulations - Page 19
3.7. LEVEL OF VIBRATIONS
The machine does not transmit vibrations to the ground that may jeopardize the stability and precision of any equipment
located nearby.
The machine does not transmit vibrations that may be considered as endangering the safety of operators.
3.8. ELECTROMAGNETIC COMPATIBILITY
The supplied machine contains electronic components subject to regulations on Electromagnetic Compatibility,
conditioned by conducted and radiated emissions.
The emission values comply with regulatory requirements thanks to the use of components conforming to the Electromagnetic
Compatibility Directive and of suitable connections, and to the installation of filters where necessary.
DANGER!
Any maintenance operations carried out on the electrical equipment in a non-conforming fashion,
or wrong component replacements may compromise the efficiency of the adopted solutions and
the safety of the platform.
3.9. GENERAL SAFETY WARNINGS
The aim of this chapter is to inform operators as to any significant risks and dangers and on the general and specific
precautions to be adopted in order to eliminate or mitigate them.
This manual contains information and instructions pertaining to:
♦ dangerous situations that may take place during machine use and maintenance;
♦ the adopted protections, guards and safety devices and their proper use;
♦ residual risks and rules of behaviour (general and specific precautions in order to eliminate or contain them).
The instructions and safety warnings contained in this manual are written taking into account the fact that, in the workplace,
the prescriptions concerning workplace safety as provided for by the regulations in force in the country where the machine
is being used must be known and applied. They contain important information for:
♦ the safety of people assigned to operate and carry out maintenance on the machine;
♦ the safety and efficiency of the machine.
The company MULTITEL PAGLIERO S.p.A., considers itself relieved from any responsibility with regards to damages to
people or property resulting from:
♦ improper use;
♦ use by untrained personnel;
♦ lack of maintenance;
♦ use of non-original spare parts;
♦ full or partial non-compliance with the instructions;
♦ tampering with the safety devices and guards;
♦ exceptional events;
♦ unauthorized changes;
♦ failure to comply with the safety and prevention rules contained in this manual.
To Next Page
Loading...